+41 79 591 4756

Monday through Friday: 8:30 a.m. – 4:00 p.m.

We are hiring a sales representative: Contact us

MXRuler MaxxMacro Ruler – Corrosion-Resistant

Ref. ND

Wire EDM ruler, 275 to 845 mm, supplied fully assembled with clamping accessories. Corrosion-resistant design, 100% interchangeable with the System 3R 3R-239 series.

MXRuler MaxxMacro Corrosion-Resistant Ruler for Wire EDM

The MXRuler MaxxMacro is a clamping system designed for wire electrical discharge machining (WEDM) machines, available in lengths ranging from 275 to 845 mm. It comes fully assembled and ready to use, with an accessory kit that allows you to clamp your workpieces immediately.

It is 100% compatible with the System 3R Macro system (3R-239 series): it can be integrated into an existing setup without any modifications. Each ruler length is paired with a cross-section designed to ensure optimal stability: 60 × 30 mm up to 525 mm, and 86 × 36 mm for lengths of 545 mm and longer.

Réf.CompatibleLength
7MM-RU60R2753R-239-275275 mmSelect
7MM-RU60R2953R-239-295295 mmSelect
7MM-RU60R3103R-239-310310 mmSelect
7MM-RU60R3153R-239-315315 mmSelect
7MM-RU60R3253R-239-325325 mmSelect
7MM-RU60R3303R-239-330330 mmSelect
7MM-RU60R3453R-239-345345 mmSelect
7MM-RU60R3503R-239-350350 mmSelect
7MM-RU60R3553R-239-355355 mmSelect
7MM-RU60R3653R-239-365365 mmSelect
7MM-RU60R3853R-239-385385 mmSelect
7MM-RU60R3953R-239-395395 mmSelect
7MM-RU60R4103R-239-410410 mmSelect
7MM-RU60R4153R-239-415415 mmSelect
7MM-RU60R4203R-239-420420 mmSelect
7MM-RU60R4253R-239-425425 mmSelect
7MM-RU60R4353R-239-435435 mmSelect
7MM-RU60R4453R-239-445445 mmSelect
7MM-RU60R4553R-239-455455 mmSelect
7MM-RU60R4603R-239-460460 mmSelect
7MM-RU60R4653R-239-465465 mmSelect
7MM-RU60R4953R-239-495495 mmSelect
7MM-RU60R5153R-239-515515 mmSelect
7MM-RU60R5203R-239-520520 mmSelect
7MM-RU60R5253R-239-525525 mmSelect
7MM-RU86R5453R-239-545.86545 mmSelect
7MM-RU86R5503R-239-550.86550 mmSelect
7MM-RU86R5653R-239-565.86565 mmSelect
7MM-RU86R5753R-239-575.86575 mmSelect
7MM-RU86R5953R-239-595.86595 mmSelect
7MM-RU86R6053R-239-605.86605 mmSelect
7MM-RU86R6153R-239-615.86615 mmSelect
7MM-RU86R6183R-239-618.86618 mmSelect
7MM-RU86R6253R-239-625.86625 mmSelect
7MM-RU86R6453R-239-645.86645 mmSelect
7MM-RU86R6503R-239-650.86650 mmSelect
7MM-RU86R6653R-239-665.86665 mmSelect
7MM-RU86R6753R-239-675.86675 mmSelect
7MM-RU86R6953R-239-695.86695 mmSelect
7MM-RU86R7153R-239-715.86715 mmSelect
7MM-RU86R7303R-239-730.86730 mmSelect
7MM-RU86R7453R-239-745.86745 mmSelect
7MM-RU86R7953R-239-795.86795 mmSelect
7MM-RU86R8053R-239-805.86805 mmSelect
7MM-RU86R8153R-239-815.86815 mmSelect
7MM-RU86R8203R-239-820.86820 mmSelect
7MM-RU86R8453R-239-845.86845 mmSelect
  • Fully corrosion-resistant design with built-in height adjustment
  • Enhanced rigidity over long lengths: 86 mm wide × 36 mm high cross-section starting at 545 mm (60 × 30 mm below that)
  • Compatible with any reference component (requires 60 mm sliding clamps A2391, réf. 7MM-RUACR101, or 86 mm sliding clamps A2392, réf. 7MM-RUACR102, depending on the cross-section)

The MXRuler is the most versatile clamping solution for wire EDM machines. Available in several lengths to accommodate the size of each machine, it is compatible with a wide range of MXRuler accessories (clamps, V-blocks, clamps, support brackets, etc.) for quickly securing workpieces of various shapes and sizes.

The result: faster setup and repeatable part positioning.

Each ruler comes assembled with its clamping kit:

  • 1 MaxxMacro MXRuler ruler
  • 1 MXRuler eccentric stop (réf. 7MM-RUACR214)
  • 2 A239 direct-mount clamps without rail (réf. 7MM-RUACA103)
  • Stepped Support Brackets 239.22 (réf. 7MM-RUACR203)
  • 2 standard 60-mm support brackets 239.25 (réf. 7MM-RUACR201)
  • Basic Clamp Bands 239.241 (réf. 7MM-RUACR205)

The exact number of supports and clamps based on the length is displayed when you select a length.

The ruler length depends on your machine. Select a length to view the list of compatible machines (horizontal or vertical mounting).

Not sure if it's compatible with your system? Contact us: our team will confirm the correct part number for you.

  • Clamping of Parts in Wire EDM
  • Horizontal or vertical installations, depending on the machine
  • Direct mounting on the machine table or on reference elements
  • Base for the entire MXRuler accessory line
  • Brand: MaxxMacro
  • Type: MXRuler Ruler
  • Lengths: 275 to 845 mm
  • Cross-section: 60 mm × 30 mm (275 to 525 mm) / 86 mm × 36 mm (545 to 845 mm)
  • OEM-compatible: 3R-239 series (System 3R Macro)
  • Clamping surfaces: 1
  • Treatment: corrosion protection
  • Delivery: Assembled, ready to use, with accessory kit
  • 100% compatible with the System 3R Macro system: no modifications required
  • Corrosion-resistant design, suitable for the dielectric environment of wire EDM
  • Delivered fully assembled and ready to use
  • Complete clamping kit included
  • Wide selection of compatible MXRuler accessories
Logistics Responsiveness
Technical Support
Inventory Reliability

Contact Us

Need more information? Let's talk about it!

Do you have a question, a request, or just need some clarification? Write to us! Our team is here to help and will respond quickly with all the information you need.

Get in touch