MXRuler MaxxMacro Ruler – Corrosion-Resistant
Wire EDM ruler, 275 to 845 mm, supplied fully assembled with clamping accessories. Corrosion-resistant design, 100% interchangeable with the System 3R 3R-239 series.
MXRuler MaxxMacro Corrosion-Resistant Ruler for Wire EDM
The MXRuler MaxxMacro is a clamping system designed for wire electrical discharge machining (WEDM) machines, available in lengths ranging from 275 to 845 mm. It comes fully assembled and ready to use, with an accessory kit that allows you to clamp your workpieces immediately.
It is 100% compatible with the System 3R Macro system (3R-239 series): it can be integrated into an existing setup without any modifications. Each ruler length is paired with a cross-section designed to ensure optimal stability: 60 × 30 mm up to 525 mm, and 86 × 36 mm for lengths of 545 mm and longer.
| Réf. | Compatible | Length | |
|---|---|---|---|
| 7MM-RU60R275 | 3R-239-275 | 275 mm | Select |
| 7MM-RU60R295 | 3R-239-295 | 295 mm | Select |
| 7MM-RU60R310 | 3R-239-310 | 310 mm | Select |
| 7MM-RU60R315 | 3R-239-315 | 315 mm | Select |
| 7MM-RU60R325 | 3R-239-325 | 325 mm | Select |
| 7MM-RU60R330 | 3R-239-330 | 330 mm | Select |
| 7MM-RU60R345 | 3R-239-345 | 345 mm | Select |
| 7MM-RU60R350 | 3R-239-350 | 350 mm | Select |
| 7MM-RU60R355 | 3R-239-355 | 355 mm | Select |
| 7MM-RU60R365 | 3R-239-365 | 365 mm | Select |
| 7MM-RU60R385 | 3R-239-385 | 385 mm | Select |
| 7MM-RU60R395 | 3R-239-395 | 395 mm | Select |
| 7MM-RU60R410 | 3R-239-410 | 410 mm | Select |
| 7MM-RU60R415 | 3R-239-415 | 415 mm | Select |
| 7MM-RU60R420 | 3R-239-420 | 420 mm | Select |
| 7MM-RU60R425 | 3R-239-425 | 425 mm | Select |
| 7MM-RU60R435 | 3R-239-435 | 435 mm | Select |
| 7MM-RU60R445 | 3R-239-445 | 445 mm | Select |
| 7MM-RU60R455 | 3R-239-455 | 455 mm | Select |
| 7MM-RU60R460 | 3R-239-460 | 460 mm | Select |
| 7MM-RU60R465 | 3R-239-465 | 465 mm | Select |
| 7MM-RU60R495 | 3R-239-495 | 495 mm | Select |
| 7MM-RU60R515 | 3R-239-515 | 515 mm | Select |
| 7MM-RU60R520 | 3R-239-520 | 520 mm | Select |
| 7MM-RU60R525 | 3R-239-525 | 525 mm | Select |
| 7MM-RU86R545 | 3R-239-545.86 | 545 mm | Select |
| 7MM-RU86R550 | 3R-239-550.86 | 550 mm | Select |
| 7MM-RU86R565 | 3R-239-565.86 | 565 mm | Select |
| 7MM-RU86R575 | 3R-239-575.86 | 575 mm | Select |
| 7MM-RU86R595 | 3R-239-595.86 | 595 mm | Select |
| 7MM-RU86R605 | 3R-239-605.86 | 605 mm | Select |
| 7MM-RU86R615 | 3R-239-615.86 | 615 mm | Select |
| 7MM-RU86R618 | 3R-239-618.86 | 618 mm | Select |
| 7MM-RU86R625 | 3R-239-625.86 | 625 mm | Select |
| 7MM-RU86R645 | 3R-239-645.86 | 645 mm | Select |
| 7MM-RU86R650 | 3R-239-650.86 | 650 mm | Select |
| 7MM-RU86R665 | 3R-239-665.86 | 665 mm | Select |
| 7MM-RU86R675 | 3R-239-675.86 | 675 mm | Select |
| 7MM-RU86R695 | 3R-239-695.86 | 695 mm | Select |
| 7MM-RU86R715 | 3R-239-715.86 | 715 mm | Select |
| 7MM-RU86R730 | 3R-239-730.86 | 730 mm | Select |
| 7MM-RU86R745 | 3R-239-745.86 | 745 mm | Select |
| 7MM-RU86R795 | 3R-239-795.86 | 795 mm | Select |
| 7MM-RU86R805 | 3R-239-805.86 | 805 mm | Select |
| 7MM-RU86R815 | 3R-239-815.86 | 815 mm | Select |
| 7MM-RU86R820 | 3R-239-820.86 | 820 mm | Select |
| 7MM-RU86R845 | 3R-239-845.86 | 845 mm | Select |
- Fully corrosion-resistant design with built-in height adjustment
- Enhanced rigidity over long lengths: 86 mm wide × 36 mm high cross-section starting at 545 mm (60 × 30 mm below that)
- Compatible with any reference component (requires 60 mm sliding clamps A2391, réf. 7MM-RUACR101, or 86 mm sliding clamps A2392, réf. 7MM-RUACR102, depending on the cross-section)
The MXRuler is the most versatile clamping solution for wire EDM machines. Available in several lengths to accommodate the size of each machine, it is compatible with a wide range of MXRuler accessories (clamps, V-blocks, clamps, support brackets, etc.) for quickly securing workpieces of various shapes and sizes.
The result: faster setup and repeatable part positioning.
Each ruler comes assembled with its clamping kit:
- 1 MaxxMacro MXRuler ruler
- 1 MXRuler eccentric stop (réf. 7MM-RUACR214)
- 2 A239 direct-mount clamps without rail (réf. 7MM-RUACA103)
- Stepped Support Brackets 239.22 (réf. 7MM-RUACR203)
- 2 standard 60-mm support brackets 239.25 (réf. 7MM-RUACR201)
- Basic Clamp Bands 239.241 (réf. 7MM-RUACR205)
The exact number of supports and clamps based on the length is displayed when you select a length.
The ruler length depends on your machine. Select a length to view the list of compatible machines (horizontal or vertical mounting).
Not sure if it's compatible with your system? Contact us: our team will confirm the correct part number for you.
- Clamping of Parts in Wire EDM
- Horizontal or vertical installations, depending on the machine
- Direct mounting on the machine table or on reference elements
- Base for the entire MXRuler accessory line
- Brand: MaxxMacro
- Type: MXRuler Ruler
- Lengths: 275 to 845 mm
- Cross-section: 60 mm × 30 mm (275 to 525 mm) / 86 mm × 36 mm (545 to 845 mm)
- OEM-compatible: 3R-239 series (System 3R Macro)
- Clamping surfaces: 1
- Treatment: corrosion protection
- Delivery: Assembled, ready to use, with accessory kit
- 100% compatible with the System 3R Macro system: no modifications required
- Corrosion-resistant design, suitable for the dielectric environment of wire EDM
- Delivered fully assembled and ready to use
- Complete clamping kit included
- Wide selection of compatible MXRuler accessories
Contact Us
Need more information? Let's talk about it!
Do you have a question, a request, or just need some clarification? Write to us! Our team is here to help and will respond quickly with all the information you need.
